Hardwood Flooring Installed, Downtown Toronto Condos are growing phenomenon in Toronto. As sales and new condo builds keep rising (just look at the amount of cranes we have), so does the demand for hardwood flooring in these condos. Along the years different types of engineered hardwood flooring in Toronto were introduced, and so did different methods of hardwood (engineered) flooring installation came along, that suit condo conditions and rules.
Below are main systems used by professional hardwood flooring installers:
*Glue tongue and groove system: Simple installation, as the installer puts glue in the groove and puts together the hardwood flooring planks (tongue to groove). Along the process, every few lines, the installer should tape (using tape that friendly for varnish and stain) the planks together so they stay tight until the glue completely dries (usually 24 hours to be sure)
*Click-lock flooring installation system: In this case, two planks are simply clicked together like a puzzle, similar to laminate flooring installation. The installation is faster and simpler, and therefore cost for this type of installation is usually lower than the rest.
*Glue-down method: widely used within the flooring installation industry, especially for parquet type of wood flooring. Today you can glue any type of engineered hardwood flooring using the glue down method (or double). This method usually being used over concrete subfloor, but also can be used in a house where sub floor is wooden. This method will be more costly than the rest of the above installation methods, but also the best in terms of durability and quality.
There are many factors that could aspect the system or method being used for flooring installation. Additional research and knowledge about different installation systems will enable you to make an informative choice.
You may visit our page for more details on flooring installation methods, or browse around our blogs as information constantly posted.
Below are main systems used by professional hardwood flooring installers:
*Glue tongue and groove system: Simple installation, as the installer puts glue in the groove and puts together the hardwood flooring planks (tongue to groove). Along the process, every few lines, the installer should tape (using tape that friendly for varnish and stain) the planks together so they stay tight until the glue completely dries (usually 24 hours to be sure)
*Click-lock flooring installation system: In this case, two planks are simply clicked together like a puzzle, similar to laminate flooring installation. The installation is faster and simpler, and therefore cost for this type of installation is usually lower than the rest.
*Glue-down method: widely used within the flooring installation industry, especially for parquet type of wood flooring. Today you can glue any type of engineered hardwood flooring using the glue down method (or double). This method usually being used over concrete subfloor, but also can be used in a house where sub floor is wooden. This method will be more costly than the rest of the above installation methods, but also the best in terms of durability and quality.
There are many factors that could aspect the system or method being used for flooring installation. Additional research and knowledge about different installation systems will enable you to make an informative choice.
You may visit our page for more details on flooring installation methods, or browse around our blogs as information constantly posted.
RSS Feed
