As much as we don’t want to think about terrifying stuff such as hardwood flooring sanding and refinishing, let’s be realistic: sooner or later you will have to do it, specially when it comes to the old hardwood floors in Toronto area. But wait, don’t get too scared. Sanding is not only a rehabilitation for the old and stained hardwood flooring, or hardwood floors that were hiding under your carpet. You can embrace a new and sophisticated look of your “a few years old floors” if you wish. For a busy mom, young professional or a pet lover it is not a secret that it is fairly difficult to have your gorgeous hardwood floors undamaged even a tiny little bit, let’s say after five years. So take a deep breath and relax. You can indeed fix your sparkling hardwood floors without a hassle.
Now, although hardwood flooring sanding in Makrham area is not a rocket science, it might be fairly complicated task for one for a few reasons. First of all, you will need a sufficient amount of special tools such as sanding machine, floor edger, buffer. More over safety equipment such as mask, goggles, gloves and shoes are necessary in order to protect yourself from the dust and other possible health hazards. If the words drum sanding machine sounds unfamiliar, no worries. You can always get a hand from the professional, who are swimming in the wooden flooring installation and renovation industry. They have all the equipment and expertise on their hands. You will have time and guaranteed high quality result at your fingertips. After all, tool rental expenses and materials might be fairly expensive and the preparation time for the actual wooden floors sanding procedure might time-consuming. If you doubt your hardwood flooring sanding skills just spend some time for the research and hire the bestwooden flooring installation professionals with their “born to be ready” attitude. Besides, as professional hardwood flooring installers, the least they worry about is to get dusted.
You wish to install flooring baseboards by yourself, make sure you are aware of little tricks and tips prior to actual installation. You will need power miter saw, hammer, finish nails, putty knife as well as sandpaper (medium grid: range between #60-#80). Although you might not have your own power miter saw, it is a good idea to rent or borrow one, since it will make the floor baseboard installation easier and faster.
Make sure to measure the area you are planning to install floor baseboards few times in order to illuminate future difficulties and material shortage. It is also a good idea to buy extra material ( 10%-20%) just to be on a safe side.
To start, you have to find your longest wall in the area which you planning to install flooring baseboards. If you have a baseboard plank that is long enough to cover your longest wall, then just install it as it is. If you, however, need two pieces in order to cover the longest wall, then you can join the pieces with scarf joints. Notice that there are rarely a 90 degree cut requires, so use your miter saw in order to find the best appropriate angle for your baseboard corners. There are also baseboards in the market with different colors and shades, so it doesn't have to be white. You can also paint them after with the wood stain if you wish to change the original tone of the baseboards you purchased.
Hardwood-Parqueteam offers Hardwood Flooring in Markham area, and hardwood flooring installation at the best prices. Visit our website for more information.
Why tongue and groove method of engineered hardwood flooring installation in Markham becoming so popular? The answer is simple: it is an easy and fast installation method used by both professional flooring installers as well as DIY-ers. The task will become even more easier if you will purchase pre-finished engineered hardwood flooringmaterial, so no varnishing and/or staining is required after.
When tongue and groove method is being used, the planks of the engineered hardwood floors are being clicked together. No glue involved. Perhaps, the installation preparation process is more time consuming than the actual flooring installation. In comparison to glue-down method, used mainly by professional floor installers, the tongue and groove method requires less construction tools and flooring installation products. Moreover, tongue and groove method requires less effort for the DIY projects. Finally, in terms of money, the tongue and groove installation method would cost less, but the final look of your hardwood engineered floors will be of equal quality as if you would use other two methods.
The installation guide provided by manufacturers is usually very informative and detailed. The hardest part could be to collect the proper measurements of the installation area, and as a result, the proper amount of the material needed for the installation. In addition, it is sometimes hard to tell how the final color of your floors is going to look like. So it’s a great idea to surf the net for some visual cues you can use later. Weather it is a DIY project or weather you are planning to hire a team of professional flooring installers, don't forget to weigh all the pros and cons of the installation methods currently available. If you having a limited budget allocated towards flooring installation, and you wish to install engineered hardwood flooring, perhaps tongue and groove installation method would be the best option. Hardwood Flooring in Markham slowly becomes a popular trend, so what are you waiting for? Call now, and get your flooring done as well!
Parqueteam Hardwood Flooring
Hardwood Flooring Toronto and The Greater Toronto Area.