Replacing Old Parquet or Carpet Flooring in a Toronto Condo

7/16/2026

Replacing Old Parquet or Carpet Flooring in a Toronto Condo

Q: Is it better to remove old condo flooring before installing new flooring?

In most cases, yes. Removing old flooring helps avoid height problems, uneven surfaces, poor transitions, movement, trapped moisture, and installation issues. Old carpet should almost always be removed before installing new hard surface flooring.

Many older Toronto condos still have original parquet flooring, old carpet, outdated laminate, or worn vinyl flooring. Over time, these floors can become scratched, loose, stained, uneven, noisy, or simply outdated.

Replacing old condo flooring can completely change the look and value of the unit. It can also make the space easier to clean, more modern, and more attractive for resale or rental.
However, condo flooring replacement is different from replacing floors in a house. Most Toronto condos have concrete subfloors, building rules, elevator booking requirements, soundproof underlayment rules, and condo board approval processes.

At Parqueteam Hardwood Flooring, we provide condo flooring installation in Toronto for old floor removal, parquet flooring replacement, carpet removal, vinyl flooring, laminate flooring, engineered hardwood flooring, soundproof underlayment, and concrete subfloor preparation.

Best Flooring Options After Removing Old Parquet or Carpet

Why Many Toronto Condo Floors Need Replacement

Older condo flooring can wear out for many reasons.
Common issues include:

old parquet blocks lifting or separating
carpet stains and odours
worn traffic paths
outdated colours
scratches and dents
water damage
loose or noisy areas
flooring that no longer matches the rest of the unit

In many older Toronto condos, the existing floor may have been installed years ago over a concrete subfloor. Before new flooring can be installed, the old floor usually needs to be removed and the concrete needs to be checked.

Replacing Old Parquet Flooring in a Condo

Old parquet flooring is common in many Toronto condo buildings.
Parquet can last a long time, but older parquet floors may become loose, uneven, yellowed, scratched, or outdated. In some cases, parquet can be refinished, but in many condos it makes more sense to remove it and install a new flooring system.

Old parquet may need replacement when:

blocks are loose
sections are lifting
the floor has water damage
the surface is badly worn
there are gaps between blocks
the customer wants wider plank flooring

Removing parquet can be more labour-intensive than removing carpet or floating laminate. The difficulty depends on how the parquet was installed, how strong the adhesive is, and what condition the concrete subfloor is in underneath.
After removal, the concrete may need scraping, cleaning, patching, grinding, or leveling before the new floor is installed.

Replacing Old Parquet Flooring in a Condo

Replacing Carpet Flooring in a Condo

Old carpet is another common issue in Toronto condos.
Carpet can hold stains, odours, dust, pet smells, and allergens. Many condo owners replace carpet with hard surface flooring because they want a cleaner, more modern, and easier-to-maintain floor.

Common carpet replacement options include:

vinyl flooring
laminate flooring
engineered hardwood flooring

Carpet removal is usually more straightforward than parquet removal, but the subfloor still needs to be checked after the carpet and underpad are removed.
There may be:

tack strips
staples
old underpad residue
uneven concrete
height differences at transitions
baseboard or shoe moulding issues

Once the carpet is removed, the new flooring option must still meet the condo building’s requirements.

Can You Install New Flooring Over Old Condo Flooring?

Sometimes homeowners ask if new flooring can be installed over the existing floor.
In many cases, it is better to remove the old flooring first.

Installing new flooring over old condo flooring can create problems such as:

floor height issues
uneven surfaces
poor transitions
doors rubbing
movement under the new floor
failure of the new flooring system

Old carpet should almost always be removed before installing new hard surface flooring.

Old parquet, laminate, vinyl, or engineered hardwood should usually be removed if it is loose, uneven, damaged, too high, or not suitable as a base for the new floor.

The best approach depends on the existing floor, subfloor condition, new flooring product, and condo rules.

Replacing Old Parquet or Carpet Flooring in a Toronto Condo

Best Flooring Options After Removing Old Parquet or Carpet

After old parquet or carpet is removed, the most common replacement options are engineered hardwood, vinyl flooring, and laminate flooring.
Each option has a different purpose.

Engineered Hardwood Flooring

Engineered hardwood is usually the premium option for Toronto condos.
It is a good choice when the owner wants a real wood floor, better resale appeal, and a higher-end look. Engineered hardwood is more stable than solid hardwood and can work well over concrete when installed with the right method and approved underlayment system.
For more details, visit our engineered hardwood flooring Toronto page.

Laminate Flooring

Laminate flooring is usually the most budget-friendly replacement option.
It can be a good choice for bedrooms, living rooms, hallways, and dry areas where the goal is to update the condo at a lower cost.
Laminate can make an older condo look much cleaner and more modern, but it is not usually the best choice for high-moisture areas. For kitchens, laundry areas, pet-heavy units, or rental condos where spills are more likely, vinyl flooring may be safer.
For more details, visit our laminate flooring Toronto page.

Vinyl Plank Flooring

Vinyl flooring is one of the most practical replacement options for condos.
It is waterproof, durable, easy to clean, and available in many modern wood-look designs. Vinyl is often a strong option for rental condos, investment units, pet-friendly condos, kitchens, hallways, and high-traffic spaces.
Vinyl flooring can be a good choice when the owner wants a durable floor that can handle everyday wear better than laminate.
For more details, visit our vinyl flooring Toronto page.

Best Replacement Choice by Situation

If you want a premium real wood finish, choose engineered hardwood.
If you want waterproof performance and easy maintenance, choose vinyl flooring.
If you want the most affordable update for dry areas, choose laminate flooring.
If you are replacing carpet in a rental condo, vinyl flooring is often the most practical choice.
If you are replacing old parquet before selling, engineered hardwood may give the strongest resale appeal.
If the old floor is uneven or glued down, subfloor preparation will be one of the most important parts of the project.

Final Thoughts on Replacing Old Condo Flooring

Replacing old parquet or carpet flooring in a Toronto condo can make the unit look cleaner, newer, and more valuable.

The most important steps are checking the condo rules, removing the old flooring properly, preparing the concrete subfloor, choosing the right underlayment, and installing a flooring product that fits the unit and building requirements.

Parqueteam Hardwood Flooring helps Toronto condo owners replace old parquet, carpet, laminate, vinyl, and engineered hardwood with modern flooring options such as engineered hardwood, vinyl flooring, and laminate flooring.
For help with condo flooring replacement in Toronto, contact Parqueteam Hardwood Flooring for a free quote.

Finished condo flooring replacement in a Toronto apartment after removing old parquet or carpet

Replacing Old Condo Flooring FAQ

Can old parquet flooring be replaced in a Toronto condo?
Yes, old parquet flooring can often be removed and replaced with engineered hardwood, vinyl flooring, or laminate flooring. The process depends on how the parquet was installed, how strong the adhesive is, and the condition of the concrete subfloor underneath.

Can carpet be replaced with hard flooring in a condo?
Yes, carpet can often be replaced with engineered hardwood, vinyl, or laminate flooring, but condo building rules should be checked first. Many buildings require acoustic underlayment when carpet is replaced with hard surface flooring.

Is it better to remove old condo flooring before installing new flooring?
Yes. Removing old flooring helps avoid height problems, uneven surfaces, poor transitions, movement, trapped moisture, and installation issues. Old carpet should always be removed before installing new hard surface flooring.

Can new flooring be installed over old parquet?
Sometimes it may be possible, but it is usually better to remove old parquet if it is loose, uneven, damaged, too high, or poorly bonded to the concrete. Installing over bad parquet can cause movement, noise, gaps, or failure in the new floor.

Why is old parquet hard to remove?
Old parquet can be difficult to remove because the wood blocks may be strongly glued to the concrete subfloor. After the parquet is removed, old adhesive may still need to be scraped, ground, patched, or cleaned before the new flooring is installed.

What is the best flooring to replace old carpet in a condo?
Vinyl flooring is often a practical choice after carpet removal because it is waterproof, durable, and easy to maintain. Engineered hardwood is a good premium option, while laminate can be a budget-friendly choice for dry areas such as bedrooms, living rooms, and hallways.

What is the best flooring to replace old parquet in a condo?
Engineered hardwood is often the best premium replacement for old parquet because it gives a real wood look with better resale appeal. Vinyl flooring is a practical option for durability and moisture resistance, while laminate is usually the most affordable option.

Do I need soundproof underlayment after removing carpet?
Many condo buildings require soundproof or acoustic underlayment when carpet is replaced with hard surface flooring. Carpet naturally absorbs sound, so replacing it with engineered hardwood, vinyl, or laminate may require an approved underlayment system.

Does the concrete subfloor need preparation after removing old flooring?
Often, yes. After old parquet, carpet, vinyl, laminate, or engineered hardwood is removed, the concrete may need scraping, cleaning, patching, grinding, or leveling. Proper subfloor preparation helps prevent movement, clicking, gaps, unevenness, and installation failure.

How much does it cost to replace old condo flooring?
The cost depends on the old flooring type, removal difficulty, new flooring material, installation method, underlayment, concrete subfloor preparation, trims, transitions, furniture, and building access. Carpet removal is usually easier, while glued parquet or tile removal can cost more.

Is vinyl flooring good for replacing old condo flooring?
Yes, vinyl flooring is a strong option for replacing old condo flooring because it is waterproof, durable, easy to clean, and practical for rental units, pet-friendly condos, kitchens, hallways, and high-traffic areas.

Is engineered hardwood good for replacing old parquet?
Yes, engineered hardwood can be a good replacement for old parquet if you want a real wood floor with a more modern look. It can work well over concrete when installed with the right method, underlayment, and condo approval.

Is laminate flooring good for replacing old condo carpet?
Laminate flooring can be a good option for replacing carpet in dry condo areas such as bedrooms, living rooms, and hallways. It is usually more affordable than engineered hardwood, but vinyl may be better where waterproof performance is important.

Do I need condo board approval before replacing old flooring?
Many Toronto condo buildings require approval before old flooring is removed and replaced. Property management may ask for flooring product details, underlayment specifications, acoustic ratings, contractor insurance, renovation forms, elevator booking, and project dates.

How do I prepare for condo flooring replacement?
Start by checking the condo building rules, approved flooring types, underlayment requirements, elevator booking process, working hours, and contractor insurance requirements. It also helps to clear small items, confirm furniture moving needs, and send photos of the existing floor before getting a quote.

0 Comments

How Much Does It Cost to Glue Down Vinyl Flooring in Toronto?

10/6/2025

0 Comments

How Much Does It Cost to Glue Down Vinyl Flooring in Toronto?

Glue-down vinyl flooring has become a go-to option for many Toronto homeowners, condo residents, and business owners seeking a sleek, durable, and cost-effective solution. Whether you're updating a commercial space or renovating a condo unit, one of the first questions that comes up is: "How much is this going to cost?"
In this post, we’ll break down the real-world costs of glue-down vinyl plank flooring in Toronto — including material prices, professional installation rates, and other potential expenses. We’ll also share insights based on actual flooring projects we've completed across the Greater Toronto Area, so you’ll know exactly what to expect.

Durable glue-down vinyl flooring installed in a high-traffic Toronto commercial space

What Is Glue-Down Vinyl Plank Flooring?

Glue-down vinyl plank flooring is a type of luxury vinyl that is installed by adhering each plank directly to the subfloor using a specialized adhesive. Unlike click-lock vinyl flooring, which floats above the subfloor, glue-down vinyl creates a more permanent and stable flooring surface — making it an excellent choice for high-traffic areas or commercial spaces.
This flooring type is typically thinner than click vinyl (usually 3mm to 5mm) but offers excellent durability, water resistance, and sound absorption. It’s especially popular in Toronto condos, offices, and retail spaces where sound insulation and low-profile flooring are essential.

Key Benefits of Glue-Down Vinyl Flooring:

Great for both residential and commercial flooring use
Allows for creative patterns like herringbone
Quiet and soft underfoot
Excellent stability — no shifting or movement over time
Ideal for spaces where heavy furniture or equipment is used

Cost Breakdown in Toronto

When budgeting for glue-down vinyl flooring in Toronto, it’s important to consider both material and installation costs — which can vary depending on the quality of vinyl, installation method (straight or herringbone), and site conditions.
Material Cost (Per Square Foot)

Standard glue-down vinyl plank (3mm – 5mm):
$3.99 – $4.99 per sq ft

This range includes high-quality luxury vinyl planks suitable for both residential and commercial spaces. Thicker vinyl may be priced slightly higher but often provides improved durability and foot comfort.
Installation Cost (Per Square Foot)

Straight lay installation:
$2.50 – $3.50 per sq ft
Herringbone installation:
$4.00 – $5.50 per sq ft

Herringbone or other patterned installs require more precision, time, and waste material, which is why the cost is higher than a standard straight lay.
Optional & Site-Specific Costs

Old flooring removal (if needed):
$0.50 – $3.00 per sq ft (depends on material and removal complexity)
Subfloor leveling or repair:
Varies widely. Uneven or damaged subfloors may require patching or leveling compound, which can add $1.00 – $2.00+ per sq ft to the cost.
Glue and adhesives:
Usually included in installation cost when hiring a professional. If DIY, you’ll need to budget for high-quality adhesive (approx. $0.30 – $0.50 per sq ft).

Total Estimated Cost (All-In)

Straight Lay: Approximately $6.49 – $8.49 per sq ft installed
Herringbone Pattern: Approximately $7.99 – $10.49 per sq ft installed

Cost Comparison vs Other Flooring Types

When comparing glue-down vinyl plank flooring to other popular flooring options in Toronto, the value it offers becomes quite clear — especially when considering both upfront costs and long-term durability.

Compared to click vinyl plank flooring, glue-down options are typically more costly when looking at similar thickness and wear layers. Click vinyl can cost less in material and the installation costs may be lower since it doesn’t require adhesive. However, in high-traffic areas or commercial spaces, glue-down vinyl remains the preferred choice for its stability and longevity, justifying the slightly higher labor cost.

Laminate flooring, often has a lower material price point than vinyl, but that comes with trade-offs. Laminate isn’t waterproof and doesn’t perform as well in moisture-prone areas like kitchens or basements. Installation costs for laminate are similar to click vinyl, but glue-down vinyl ultimately provides better long-term value in humid environments.

Engineered hardwood flooring typically sits at the higher end of the cost spectrum. While it offers a more natural look and resale appeal, it can cost nearly double that of glue-down vinyl once you factor in both material and professional installation. Maintenance also tends to be higher, especially in homes with kids or pets.

In summary, glue-down vinyl flooring strikes an excellent balance — offering a modern aesthetic, water resistance, and affordability. For many Toronto homeowners, it delivers a premium feel without the premium price tag, especially when compared to engineered hardwood or more delicate laminate options.

Glue-down luxury vinyl plank flooring installation Toronto condo unit

Factors That Affect Pricing

While glue-down vinyl plank flooring is one of the more affordable flooring solutions in Toronto, several factors can influence the overall cost of your project. Being aware of these variables can help you better estimate your budget and avoid surprises:

1. Quality & Thickness of Vinyl Planks
Higher-quality planks with thicker wear layers (e.g., 20 mil or commercial-grade) and more realistic textures or finishes will naturally cost more. For example, luxury vinyl with enhanced realism or embossed surfaces tends to be priced closer to $4.99 per sq. ft., while simpler residential options start around $3.99.

2. Size of the Project
Larger spaces generally benefit from economies of scale. The more square footage you're covering, the more likely you are to negotiate better material pricing and labor rates. Small projects, like a bathroom or hallway, may incur higher per-square-foot installation costs due to setup and minimum job fees.

3. Installation Pattern: Straight vs. Herringbone
A standard straight lay is the most cost-effective installation method, ranging from $2.50 to $3.50 per sq. ft. However, if you’re opting for a herringbone or custom pattern, expect to pay a premium — typically $4.00 to $5.50 per sq. ft. — due to the additional labor and cutting precision required.

4. Subfloor Condition & Preparation
A smooth, clean subfloor is essential for glue-down vinyl. If your existing subfloor requires patching, leveling, or moisture mitigation, this prep work can increase both material and labor costs. In older homes or condos, this is often a hidden cost that must be addressed before installation.

5. Old Flooring Removal
If you’re replacing existing flooring (e.g., laminate, carpet, or tile), there may be additional charges for removal and disposal. This can range from $0.50 to $3.00 per sq. ft., depending on the flooring type and complexity.

Is It Worth It? A Toronto Homeowner’s Perspective

When evaluating whether glue-down vinyl plank flooring is worth the investment, Toronto homeowners should weigh both the short-term savings and long-term value it provides.
Why Many Toronto Residents Choose It:

Durability in Urban Living: In high-traffic households — especially condos with pets, kids, or heavy footfall — glue-down vinyl stands up to wear and tear better than many click-together options. It won’t shift or lift over time when installed correctly, which is crucial in Toronto’s variable climate.
Budget-Friendly Without Looking Cheap: With starting material prices around $3.99 per sq. ft. and basic installation from $2.50 per sq. ft., it delivers the look of high-end hardwood or tile at a fraction of the price — making it perfect for first-time buyers or landlords renovating a rental unit.
Moisture Resistance for Basements & Condos: Given Toronto’s older housing stock and the popularity of basement suites or below-grade spaces, glue-down vinyl’s resistance to moisture makes it a no-brainer for many homeowners.

When It Might Not Be Ideal:

Temporary Renovations: If you’re planning to move soon or want flooring that’s easy to remove and reuse, click vinyl may be better suited.
Uneven Subfloors: If your subfloor isn’t level or requires a lot of prep, the added costs may tip the scale toward other flooring options unless you’re committed to long-term performance.

Final Word:
For most Toronto homes, especially those looking for a waterproof, long-lasting, and cost-effective solution, glue-down vinyl flooring is not just “good” — it’s often the best-value option when installed properly.

Commercial space office room with a glue down vinyl plank floor in toronto

Recommended Readings

Frequently Asked Questions (FAQs)

How much does glue-down vinyl plank flooring cost per square foot in Toronto?
On average, materials range from $3.99 to $4.99 per sq. ft., while installation for straight lay costs $2.50 to $3.50 per sq. ft.. For herringbone patterns, installation costs rise to $4.00 to $5.50 per sq. ft.

Is glue-down vinyl cheaper than click vinyl?
In terms of materials, both options can be similarly priced. However, glue-down vinyl can be more cost-effective over time due to its durability and stability. Installation may cost more upfront due to the need for adhesive and subfloor prep.

Why is glue-down vinyl flooring more expensive to install?
Glue-down vinyl requires more precise subfloor preparation and the use of adhesive. These extra steps take more labor and time compared to click-together flooring, which is faster to install.

Can I install glue-down vinyl flooring myself?
While possible, professional installation is strongly recommended — especially in Toronto condos or commercial settings — to ensure long-term durability, proper adhesion, and warranty protection.

Is glue-down vinyl flooring waterproof?
Yes. Glue-down vinyl plank flooring is fully waterproof and an excellent choice for kitchens, bathrooms, basements, and high-moisture environments.

Do I need to remove my old floor before installing glue-down vinyl?
Not always. However, the subfloor must be clean, level, and stable. In some cases, removing old flooring is necessary, especially if it’s loose, damaged, or incompatible with adhesive.

How long does glue-down vinyl last?
With proper installation and care, glue-down vinyl flooring can last 15 to 25 years, depending on traffic, maintenance, and quality of the product.

0 Comments

What Thickness of Vinyl Plank Flooring Is Best for Toronto Homes?

10/3/2025

0 Comments

What Thickness of Vinyl Plank Flooring Is Best for Toronto Homes?

When it comes to vinyl plank flooring, thickness is more than just a number—it plays a major role in how your floors feel, sound, and last over time. Especially in Toronto homes and condos, where changing seasons bring fluctuating temperatures and humidity levels, selecting the right thickness of vinyl plank flooring can make a big difference in both comfort and durability.
But how thick should your vinyl planks be? The answer depends on a few key factors: where the vinyl planks flooring is being installed, the subfloor condition, and the installation method—click or glue-down. In this blog post, we’ll break down everything you need to know to make an informed decision, based on real-life installation experience across the Greater Toronto Area.

8.5mm thick click vinyl plank flooring installed in a condo

Understanding Vinyl Plank Flooring Thickness

Before we dive into recommendations, it’s important to understand what “thickness” actually means in vinyl plank flooring. There are two types of thickness to pay attention to:

Total plank thickness (measured in millimetres, mm): This includes the full depth of the plank—from the base to the top layer.
Wear layer thickness (measured in mils): This is the top transparent coating that protects the floor from scratches, scuffs, and daily wear.

Vinyl plank flooring typically comes in thicknesses ranging from 3mm to over 10mm, but not all types are built the same. Thicker planks tend to provide:

A more stable and secure click-lock system (especially important for floating installations).
Better sound insulation and comfort underfoot.
Increased resistance to subfloor imperfections.

However, thicker doesn’t always mean better, especially when it comes to glue-down vinyl planks, which don’t rely on a click mechanism.

Real-Life Recommendations from a Toronto Vinyl Plank Flooring Installer

At Parqueteam Hardwood Flooring, we’ve installed thousands of vinyl plank floors across Toronto, and here’s what we’ve learned through real-world experience:
Click Vinyl Plank Flooring

Below 7mm: Risky. These thinner planks often have a weak click-lock system, making them prone to separating or shifting—especially in high-traffic areas or under furniture. Not recommended.
7mm: Acceptable. A decent entry-level option for smaller rooms or low-traffic areas, but not ideal for long-term durability.
8mm and Above: Highly recommended. At 8mm or more, the click system becomes noticeably stronger and more stable. These planks feel more solid underfoot and better handle expansion/contraction in changing temperatures.

Glue-Down Vinyl Plank Flooring

3mm and 5mm: Great options. Unlike click vinyl, glue-down vinyl plank flooring don’t need thickness to maintain stability. These thinner profiles are easy to install over a flat subfloor and work well in both residential and commercial settings.
Above 5mm: Rare for glue-down, but if available, they can offer added comfort and minor sound reduction. However, not necessary unless specified by design or use-case.

Pro Tip: Don’t just go by the numbers—also check the wear layer thickness. A 20 mil wear layer or higher is ideal for long-term performance in Toronto homes.

5mm thick glue down vinyl planks flooring installed in a basement

Comparing Wear Layer Thickness: 6 mil vs 12 mil vs 20+ mil

When shopping for vinyl plank flooring, thickness isn’t the only number to look at—the wear layer plays a critical role in long-term durability, especially in high-traffic Toronto homes and condos.

What Is the Wear Layer?
The wear layer is a clear protective coating on top of the vinyl plank. It shields the floor from scratches, dents, and daily wear.

Common Wear Layer Options:

6 mil - good for light use area, comes at lower cost, but scratches and dents much easiser.
12 mil - moderate traffic areas, balanced price to performance, over time might show scratches and dents.
20 mil - high traffic areas, commercial areas as well, excellent durability, but might come at higher cost per square feet.

Our Advice for Toronto Homes:

Minimum 12 mil for general residential use.
20 mil or higher if you have kids, pets, or plan to rent out the unit.
For basements or condos, combining a thicker click plank (8mm+) with a 20 mil wear layer offers the best balance of comfort, stability, and resilience.

Vinyl Plank Thickness & Installation Type: Floating vs Glue-Down

The installation method plays a crucial role in determining the ideal thickness for your vinyl plank flooring. In Toronto condos and homes, space constraints, noise regulations, and subfloor conditions often influence which type is better suited.
Click (Floating) Vinyl Plank Flooring

Ideal Thickness: Minimum 8mm for stability
Why 8mm+ is better: Thicker planks offer a more secure click-lock system, reducing risk of separation over time
Underlay: Often comes attached or added separately for soundproofing—great for condo rules
Application: Best for DIY installs, condos with noise requirements, or over slightly uneven subfloors

Risk Alert: Click vinyl under 7mm can feel flimsy, shift over time, and cause click failure. We recommend avoiding anything under 8mm, especially in high-use areas.
Glue-Down Vinyl Plank Flooring

Ideal Thickness: 3mm or 5mm
Why it's reliable: Doesn't rely on a locking system—secured with adhesive for long-term stability
Application: Great for commercial flooring use, basements, and anywhere a seamless, ultra-low-profile floor is needed
Subfloor requirements: Needs smooth, level surface—professional prep is a must

Real-World Tip: 3mm and 5mm glue-down planks perform excellently in both homes and commercial projects across Toronto. If properly installed, they’re stable and long-lasting—despite being thinner.

What Thickness Is Best for Toronto Homes, Condos, and Basements?

Choosing the right vinyl plank thickness depends not only on performance but also on your location-specific needs in Toronto. Here’s how it breaks down:
Condos

Recommended: 8mm+ click vinyl plank
Why: Thicker planks help reduce noise transfer (especially with built-in underlayment) and comply with many condo board regulations.
Pro Tip: Make sure to verify the condo’s flooring by-laws before choosing—some require specific underlayment ratings (STC/IIC).

Homes (Above Grade)

Recommended: 8mm+ click vinyl or 5mm glue-down
Why: Both are excellent—click for ease of install and comfort, glue-down for a cleaner look and stability in high-traffic areas.

Basements

Recommended: 3mm–5mm glue-down vinyl
Why: Glue-down vinyl works great in moisture-prone areas and won’t shift due to temperature or humidity changes.
Note: Avoid thick underlays or soft click systems for basement floors.

Commercial Spaces

Recommended: 3mm–5mm glue-down vinyl
Why: Extremely durable, easy to maintain, and doesn’t expand or contract with temperature changes like floating floors can.

10mm thick vinyl planks floors installed in toronto

Related Blog Posts:

FAQs About Vinyl Plank Thickness in Toronto

Q: Is thicker vinyl plank flooring always better?
A: Not necessarily. While thicker planks (like 8mm+) are great for comfort and acoustic performance—especially in condos and upper floors—glue-down options in the 3mm–5mm range are just as durable and more stable in moisture-prone areas like basements.

Q: Is a 5mm vinyl plank thick enough?
A: Yes, 5mm is considered a solid choice for both residential and light commercial spaces—especially for glue-down installations. It strikes a good balance between flexibility, durability, and performance.

Q: Is 7mm thick vinyl flooring okay?
A: 7mm click vinyl is borderline. While it may work in certain low-traffic areas, 8mm is highly recommended for better click stability and longevity—especially in Toronto’s temperature-fluctuating climate.

Q: What’s the difference between 6 mil and 12 mil wear layers?
A: The mil rating refers to the wear layer, not the thickness of the plank itself. 12 mil provides better scratch resistance and durability. For Toronto homes, 12 mil or higher is ideal, especially in high-traffic areas.

Q: Can I use thick vinyl plank flooring in the basement?
A: You can, but it’s not always the best idea. Thicker click planks with underlay while they are a good option, they may still have problems in basements, since a lot of basements come with unever subfloors. 3mm–5mm glue-down vinyl is a better option in basements in those cases.

0 Comments

Are Vinyl Plank Floors Better Than Laminate Floors?

10/1/2025

0 Comments

Are Vinyl Plank Floors Better Than Laminate Floors?

When choosing a new floor for your Toronto home or condo, two options often come up: vinyl plank flooring and laminate flooring. Both offer stylish looks, affordable pricing, and easier maintenance than hardwood floors. But which one is truly better?
The answer depends on your needs — especially considering Toronto’s changing seasons, condo regulations, and potential moisture exposure in basements, kitchens, or bathrooms.
In this guide, we’ll break down the differences between vinyl plank and laminate flooring, covering everything from durability and water resistance to cost and comfort, so you can make an informed decision that fits your space.

Laminate flooring vs Vinyl plank flooring

What Are Vinyl Plank & Laminate Flooring?

Vinyl Plank Flooring (LVP/LVT)

Vinyl plank flooring is a 100% synthetic product, made from multiple layers of PVC and topped with a photographic print layer and a protective wear layer. It’s available in different core types like SPC (stone plastic composite) or WPC (wood plastic composite), and comes in both click and glue-down versions.
It’s popular for:

Kitchens and bathrooms (thanks to its waterproof nature)
Condo floors and basements (due to low thickness and easy installation)
Commercial flooring (for durability and ease of replacement)

Laminate Flooring

Laminate is made from high-density fiberboard (HDF) with a photographic wood layer and a tough wear layer on top. Unlike vinyl, it contains wood materials, which means it is not fully waterproof. However, it often provides better texture and realism compared to lower-end vinyl.
It’s ideal for:

Bedrooms, living rooms, and dry spaces
Homes where budget and visual appeal are priorities
Areas where high scratch resistance is important

Vinyl Flooring vs. Laminate Flooring: Key Comparison Points for Toronto Homes

When choosing between vinyl plank flooring and laminate flooring in Toronto, several practical factors come into play:
Water Resistance
Vinyl plank flooring is fully waterproof, making it an ideal choice for moisture-prone areas like basements, kitchens, and bathrooms. Laminate flooring, on the other hand, is only water-resistant — meaning it can handle minor spills but may swell or warp with prolonged exposure to water.

Durability
Both flooring types are designed for high traffic, but vinyl plank (especially SPC or glue-down commercial-grade vinyl) tends to be more resistant to dents, scratches, and daily wear and tear. Laminate is durable as well but may show scratches more easily and isn't as impact-resistant as vinyl.

Comfort and Feel Underfoot
Laminate floors often feel harder underfoot, though they can mimic the warmth and texture of natural wood more closely. Vinyl plank flooring offers a softer and slightly more cushioned feel, especially with WPC or attached underpad options, which makes it more comfortable to walk on for long periods.

Noise and Acoustics
Without proper underlay, laminate floors can sound hollow or loud when walked on. Vinyl tends to be quieter, especially click vinyl with built-in underlayment or glue-down types that bond directly to the subfloor — a key advantage in Toronto condos where noise transfer is a concern.

Appearance and Style
Laminate flooring often offers a more authentic wood-like appearance with deep textures and embossing. However, luxury vinyl planks have significantly improved in design and now offer highly realistic visuals, including wood, stone, and tile looks.

Installation and Cost
Both are considered DIY-friendly, but vinyl plank flooring comes in more flexible formats: click-lock, glue-down, and loose lay. Laminate is mostly click-lock. In terms of cost, laminate is usually slightly cheaper per square foot, but vinyl’s water resistance and long-term durability can offer better value over time — especially in areas prone to moisture.

Vinyl Plank flooring installed in a basement setting

Which One Fits Best in Toronto Homes & Condos

When choosing between vinyl plank flooring and laminate flooring in a Toronto setting, several local factors matter — climate, housing type (condo vs. house), moisture levels, and lifestyle.

Toronto's Climate Consideration:

Vinyl Plank Flooring: Completely waterproof and resistant to humidity fluctuations. Great for Toronto’s seasonal temperature swings, especially for basement floors and condos where moisture can be a concern.
Laminate Flooring: Performs well in dry, temperature-controlled spaces but may not fare as well in areas prone to moisture or spills, like kitchens or basements.

Condos:

Both vinyl flooring and laminate flooring are good options for condo living, but vinyl flooring would have a bit of an advantage in terms of its nature being waterproof, as condos in Toronto tend to have a lot of water damage cases, which would give vinyl floors a slight advantage over laminate floors.

Homes:

In homes, both materials work well — but vinyl flooring is superior for below-grade installations (like basements).
Laminate floors shine in living rooms and bedrooms where aesthetics and underfoot feel matter more than moisture resistance.

Families & Pets:

Vinyl’s durability to scratches, spills, and noise makes it ideal for homes with kids and pets.
Laminate flooring is scratch-durable too, but less forgiving with spills or pet accidents if not cleaned quickly.

Common Misconceptions & Trade-offs

Even though vinyl plank and laminate flooring are often compared side by side, there are still many misconceptions that mislead Toronto homeowners. Let’s clear up a few:

Misconception 1: Laminate is always cheaper than vinyl.

Reality: While entry-level laminate tends to be more affordable, higher-end laminate can be more expensive than mid-range luxury vinyl plank (LVP).
Trade-off: Laminate may offer a more wood-like texture, but you lose waterproofing and flexibility in where it can be installed.

Misconception 2: All vinyl is the same.

Reality: There are major differences between click vinyl, glue-down vinyl, WPC (wood plastic composite), and SPC (stone plastic composite) vinyl. Durability, comfort, and sound insulation vary widely.
Trade-off: Click vinyl is easier to install but may not last as long in high-traffic commercial settings compared to glue-down options.

Misconception 3: Laminate can’t handle wear and tear.

Reality: Modern AC-rated laminate flooring (AC4 or AC5) is very scratch-durable, especially against pet nails and dragging furniture.
Trade-off: However, it’s still vulnerable to water damage if exposed too long — making it less ideal for bathrooms or kitchens.

Misconception 4: Vinyl feels cheap underfoot.

Reality: Today’s vinyl plank flooring includes options with thicker cores, attached underpads, and textured finishes, offering a surprisingly comfortable and natural feel.
Trade-off: These premium features come at a higher price point, which can narrow the cost gap with laminate.

Vinyl Plank flooring installed in a commercial space in Toronto office

Recommendations by Use-Case

Choosing between vinyl plank and laminate flooring often comes down to where and how you plan to use the flooring. Below are our expert recommendations based on different scenarios commonly found in Toronto homes and condos:

Condo Living (Downtown or High-Rise Units)
Recommended: Both Laminate Floor and Click Vinyl Plank Flooring

Why: Both floors work perfectly fine for condos, though vinyl plank flooring have a slight edge over laminate floors due to its water proof nature.
Bonus: Easy to install and ideal for condo boards that restrict glue-down methods.

Bathrooms & Laundry Rooms
Recommended: Glue-Down or Click Vinyl Plank Flooring

Why: These areas demand 100% waterproof flooring. Vinyl (especially glue-down types) offers superior moisture resistance compared to laminate.
Avoid: Laminate, as even water-resistant models are prone to swelling with prolonged exposure to moisture.

Family Rooms & Bedrooms
Recommended:Laminate Flooring (AC4/AC5-rated)

Why: Laminate floor offers a warmer, more natural wood feel and is very scratch-resistant — great for kids and pets.
Note: If your home is prone to spills, vinyl floor might be safer, but laminate flooring offers better comfort and texture underfoot.

Basements & Lower Levels
Recommended: Glue-Down or Click Vinyl Plank Flooring

Why: Basements in Toronto can be humid or even slightly damp. Vinyl handles moisture far better than laminate and won’t expand or contract.
Tip: For uneven subfloors, glue-down vinyl plank flooring option is highly reccomended.

Rental Units or Investment Properties
Recommended: Vinyl Plank Flooring (Click or Glue-Down)

Why: Durable, waterproof, and easy to maintain — reducing tenant-related flooring issues. Vinyl is also, glue-down vinyl plank flooring is easier to repair or replace in damaged sections.
Consider: Glue-down for commercial or multi-unit rental buildings; click is a good option for small units or temporarily rentals.

Water Resistant laminate flooring option in toronto

FAQs – Vinyl Plank vs. Laminate Flooring in Toronto

Is vinyl plank flooring more durable than laminate flooring?
Yes, especially when it comes to moisture resistance and wear in high-traffic areas. Vinyl plank is waterproof, while laminate can swell if exposed to water.

Which is more affordable: vinyl or laminate?
Laminate flooring is generally more affordable per square foot, especially for mid-range options. However, vinyl's longer lifespan and lower maintenance may offer better long-term value.

Does vinyl floor or laminate floor look more like real wood?
Laminate typically has a more realistic wood texture and appearance, especially in premium styles. Vinyl has improved, but still often has a slightly more synthetic look, depending on the brand.

Can I install vinyl or laminate flooring in a condo?
Yes, but always check with your condo board. Click vinyl is often preferred due to its waterproof nature.

Which is easier to install: laminate or vinyl plank?
Click versions of both are DIY-friendly. Vinyl is slightly more forgiving for uneven subfloors, while laminate offers tighter locking mechanisms.

Which flooring is quieter underfoot?
Both lamiante floors and vinyl planks floors have similar undefoot quietness, specially when a proper underlayment is used (or attached already by manufacturer).

0 Comments

What Are the Disadvantages of Vinyl Plank Flooring?

9/4/2025

1 Comment

Vinyl plank flooring has become one of the most popular choices in Toronto homes and condos, thanks to its affordability, water resistance, and realistic wood-like appearance. But while this flooring type offers several advantages, it’s not without its downsides.
If you're considering vinyl plank flooring for your space, it's important to understand not just what it does well—but also where it falls short. In this article, we’ll explore the most common disadvantages of vinyl plank flooring so you can make an informed decision before your next installation.

Modern Toronto condo with luxury vinyl plank flooring in the living room

Limited Lifespan Compared to Hardwood or Tile

While vinyl plank flooring can last 10–20 years with proper care, it doesn't match the durability or longevity of natural materials like solid hardwood floor or ceramic tile. Over time, wear and tear such as surface scratches, dents, and fading can develop—especially in high-traffic areas or under heavy furniture.
For homeowners in Toronto planning long-term investments in their properties, this may be a disadvantage. Vinyl flooring is often seen as a mid-range solution—not something intended to last a lifetime like hardwood flooring might.

Vinyl Flooring Repairs Are Not Easy

Unlike hardwood, which can be sanded and refinished multiple times, vinyl plank flooring is not designed for refinishing. If a section gets damaged—whether from deep scratches, heat, or water intrusion—it typically needs to be replaced entirely.
In glue-down vinyl flooring, replacing a single plank can be particularly labor-intensive. Even in click-lock systems, in order to repair damaged vinyl plank flooring sections properly and replace them, a 100% perfect match of exact same material is needed, which in a lot of cases, specially after many years, it is not always available. In that case, a full floor replacement is needed, which can be costly.
This lack of repair flexibility makes vinyl plank flooring less forgiving in busy households or commercial settings where damage may be more likely.

Close-up of vinyl plank flooring in a high-traffic Toronto hallway

Can Be Susceptible to Subfloor Imperfections

Vinyl plank flooring—especially the click lock systems - requires a smooth, level subfloor for proper installation. Any bumps, dips, or debris under the planks can telegraph through the flooring surface, creating visible imperfections over time, and may break the click system.
In older Toronto condos and homes, where subfloors may be uneven or damaged, extra preparation is often needed. This can increase both the time and cost of installation. Without proper prep, the flooring may wear unevenly, feel unstable underfoot, or even lead to premature failure.

Can Be Prone to Discoloration

Over time, vinyl plank flooring can discolor due to prolonged exposure to direct sunlight or certain household chemicals. UV rays can cause fading or yellowing, particularly in rooms with large windows and no UV protection.
Rubber materials—like mats or furniture feet—can also react with the vinyl surface, leaving permanent stains or dark spots. This is especially important in commercial spaces or condo units with rubber-backed area rugs, which can accelerate discoloration.
To reduce the risk, it’s recommended to use window coverings, non-rubber mats, and proper cleaners approved for vinyl flooring.

Is Vinyl Plank Flooring Still Worth It in Toronto?

Despite its drawbacks, vinyl plank flooring remains one of the most popular choices for Toronto homes and condos—especially in high-moisture areas like basements, kitchens, and rental units. The affordability, durability, and wide design range often outweigh the concerns for many property owners.
However, being aware of its limitations—like susceptibility to fading, lack of recyclability, and challenges with repairs—is crucial for setting the right expectations.
If you’re looking for long-lasting, water-resistant, and low-maintenance flooring, vinyl plank is a solid contender. Just be sure to:

Choose high-quality planks (ideally ≥7mm thick)
Consider glue-down installations for commercial or high-traffic use

For expert guidance and flooring installation in Toronto, reach out to us at Parqueteam Hardwood Flooring—we’ll help you select the right flooring solution for your space.

a Toronto condo with vinyl plank flooring

Frequently Asked Questions

Is vinyl plank flooring a good choice for Toronto homes?
Yes, it’s a popular choice due to its water resistance and affordability. However, it’s important to weigh the drawbacks—like difficulty in repairs — before choosing it over hardwood or laminate floors.

Does vinyl plank flooring lower home value?
Not necessarily. While it's not as prestigious as solid hardwood floors or engineered hardwood floors, quality vinyl planks can still appeal to buyers—especially in condos, rentals, and basement spaces.

Can vinyl plank flooring be repaired if damaged?
It depends on the type. Glue-down planks are easier to replace individually, while click-lock planks often require partial disassembly. Either way, repairs are more complex than with traditional hardwood floors.

How long does vinyl plank flooring last in a Toronto climate?
High-quality vinyl flooring can last 15–25 years, especially when professionally installed and maintained. However, direct sunlight, moisture buildup, and heavy furniture can shorten its lifespan.

Can vinyl planks handle Toronto winters and indoor heating?
They perform well indoors, but avoid installations in unheated spaces like enclosed porches or sunrooms. Sudden temperature swings can cause expansion and contraction.

1 Comment

What Is Better, Click Vinyl Plank Flooring Or Glue Down Vinyl Plank Flooring?

9/3/2025

0 Comments

Choosing the right vinyl plank flooring installation method is just as important as selecting the flooring itself. In Toronto, where temperature swings, heavy foot traffic, and diverse property types are common, homeowners and business owners often face the decision: should you go with click-lock (floating) or glue-down vinyl flooring?
Each installation type comes with its own pros and cons—from cost and stability to repair ease and long-term performance. In this post, we’ll compare the two methods side by side and help you determine which option suits your space and needs best.

Close-up view of luxury vinyl planks being glued to subfloor during flooring installation.

What Is Click-Lock Vinyl Flooring?

Click-lock vinyl plank flooring (also called floating vinyl) uses a tongue-and-groove system that allows planks to snap together without glue or nails. The floor “floats” above the subfloor and is typically installed with an underlayment, offering some added comfort and sound insulation.
It’s a popular choice in Toronto condos and homes because it’s:

Easier to install (DIY-friendly)
Suitable for clean, level subfloors
Quick to remove or replace

However, it’s not always the best option for large open spaces or areas with heavy rolling loads, as floating floors may shift or expand more than glue-down options.

What Is Glue-Down Vinyl Flooring?

So what is a glue down vinyl flooring? Glue-down vinyl plank flooring is installed by adhering each plank directly to the subfloor using a strong flooring adhesive. This method offers a more permanent, stable solution—especially ideal for commercial settings or high-traffic areas in Toronto homes.
Advantages include:

Greater durability and resistance to shifting
Better suited for larger or open-concept spaces
Lower profile (thickness), ideal when clearance is limited

However, glue-down installation requires professional expertise for proper leveling and adhesive application. It’s also more time-consuming to install and harder to remove compared to click-lock floors.

Modern Toronto office with sleek glue-down vinyl flooring in open-concept layout

Durability & Stability: Which One Wins?

Toronto’s mix of cold winters and humid summers can cause expansion and contraction in flooring materials. Here’s how the two compare:

Glue-down vinyl flooring tends to offer superior dimensional stability, meaning it won’t shift or lift as easily over time.
Click vinyl flooring, while flexible and resilient, can be prone to movement—especially in larger rooms or high-traffic spaces—unless expansion gaps and transitions are properly handled.

For commercial settings or high-traffic areas, glue-down is often the safer bet. For smaller residential spaces or condos, click vinyl remains a solid, cost-effective option.

Installation & Repair: Which One Is Easier?

When it comes to installation:

Click-lock vinyl flooring is easier and faster to install, often suitable for DIY projects. No adhesive is required, and planks can be easily replaced if damaged.
Glue-down vinyl flooring requires subfloor prep, adhesive work, and curing time, making it more labour-intensive and best handled by professionals.

For repairs:

Click vinyl allows for simple plank replacement—just unlock and replace.
Glue-down vinyl is also easy to replace selectively, though planks are bonded to the subfloor and may need a bit of effort to remove and would require re-gluing.

So if easy repairs and faster flooring installation are a priority, click-lock wins. But for long-term durability, glue-down still holds its edge.

Cost Comparison: Click vs. Glue-Down Vinyl Flooring in Toronto

Material cost:

Both click and glue-down vinyl come in similar price ranges depending on brand and quality. Price may vary between $2.99 - $4.99 per square feet

Installation cost:

Click vinyl installation in Toronto typically ranges from $1.50 to $2.50 per sq. ft.
Glue-down vinyl installation costs range from $2.50 to $3.50 per sq. ft., due to adhesive use and increased labour.

Over time, glue-down might offer better long-term performance, reducing replacement frequency—especially in commercial spaces. But for many Toronto homeowners, click vinyl remains the budget-friendly, hassle-free solution.

Which One Should You Choose for Your Toronto Property?

Ultimately, your choice between glue-down and click vinyl flooring depends on your specific space, traffic level, and budget:

Choose glue-down vinyl flooring if:
- You’re replacing a commercial flooring, office, or retail area
- You want maximum stability and long-term durability
- You’re working with a professional installer
Choose click-lock vinyl flooring if:
- You’re upgrading a condo floor or residential room
- You want quick installation and easy repairs
- You prefer a more DIY-friendly solution

Both options offer water resistance, stylish finishes, and durability, but the right installation method makes all the difference in performance and lifespan.
Need help deciding? At Parqueteam Hardwood Flooring, we offer both click and glue-down vinyl plank flooring services across Toronto and the Greater Toronto Area, customized to your needs.

click luxury vinyl plank flooring installed in a bright Toronto condo living space

Frequently Asked Questions (FAQ)

Is glue-down vinyl flooring more durable than click vinyl?
Yes, glue-down vinyl is generally more stable and durable—especially in high-traffic or commercial environments—because it's firmly adhered to the subfloor, minimizing shifting or lifting over time.

Can glue-down vinyl be installed in condos or homes?
Absolutely. While it's commonly used in commercial spaces, glue-down vinyl flooring is a great choice for Toronto condos or basements where stability and thin profile are needed.

Is glue-down vinyl flooring waterproof?
Yes, most glue-down vinyl plank flooring is 100% waterproof, making it suitable for kitchens, bathrooms, basements, and other moisture-prone areas.

What subfloor is required for glue-down vinyl?
The subfloor needs to be clean, dry, and level. Concrete or plywood are ideal, and any unevenness must be corrected before installation for best adhesion.

Can I install glue-down vinyl myself?
It's not recommended unless you have experience with adhesives and flooring prep. Professional installation ensures better results, especially for large areas or commercial jobs.

How long does glue-down vinyl flooring last?
When installed correctly, glue-down vinyl can last 10–20 years or more, depending on wear layer thickness and traffic levels.

0 Comments

Is Glue Down Vinyl Flooring Any Good? Expert Advice for Toronto Homes & Offices

9/2/2025

0 Comments

Choosing the Right Vinyl Installation Matters

When it comes to vinyl plank flooring, the installation method is just as important as the style and durability of the material itself. One of the most talked-about options today is glue-down vinyl plank flooring—especially for Toronto homes and commercial properties seeking long-lasting, stable performance.
But is glue-down vinyl the right choice for your space? In this post, we’ll explore what makes this flooring option stand out, its pros and cons, and when it makes sense to use it over other installation types like click-lock

Glue-down vinyl flooring installed in a high-traffic Toronto basement

What Is Glue-Down Vinyl Flooring?

Glue-down vinyl flooring is a type of luxury vinyl plank (LVP) or luxury vinyl tile (LVT) that’s secured to the subfloor using a strong adhesive. Unlike floating floors that "click" together and sit on top of the subfloor, glue-down vinyl creates a permanent bond, offering enhanced stability and performance in busy environments.
This installation method is commonly used in commercial spaces, offices, clinics, retail stores, and increasingly in residential basements and condos.

Advantages of Glue-Down Vinyl Flooring in Toronto

Glue-down vinyl flooring is a popular choice across the Greater Toronto Area for both homes and businesses — and for good reason. Here’s why:

Exceptional Durability: Once installed, glue-down vinyl stays firmly in place. This makes it ideal for high-traffic areas like offices, retail spaces, or busy family homes.
Low Profile: Since it doesn't require an underlayment, glue-down vinyl is typically thinner, which helps when clearance height is a concern—such as in condos or commercial buildings.
Moisture Resistance: Many glue-down vinyl planks or tiles are 100% waterproof, making them suitable for kitchens, laundry areas, and even commercial entrances exposed to slush and rain.
Professional Appearance: Because it adheres tightly to the subfloor, glue-down flooring gives a sleek, seamless finish with minimal movement, even under rolling office chairs or carts.
Longevity: With proper flooring installation and maintenance, glue-down vinyl can last 10–20 years or more.

When Is Glue-Down Vinyl the Best Choice?

While both click-lock and glue-down methods have their place, there are specific scenarios where glue-down vinyl is the preferred solution:

Commercial Flooring Spaces: Offices, dental clinics, retail stores, and restaurants often require floors that stay put and won’t shift under heavy foot traffic or equipment. Glue-down vinyl delivers on that.
Large, Open Areas: Floating floors expand and contract with temperature changes, which can lead to shifting in open-concept spaces. Glue-down flooring minimizes this risk.
Basement Flooring: Glue-down vinyl doesn’t rely on a locking mechanism, making it a solid option for concrete subfloors often found in Toronto basements.
Property Managers and Landlords: Its long lifespan and low maintenance make it a cost-effective flooring solution for rental units and leased offices.

Glue-down luxury vinyl plank flooring installation in a modern Toronto condo unit

Potential Drawbacks to Consider

While glue-down vinyl flooring has many benefits, it’s not ideal for every situation. Here are a few considerations:

Professional Installation Required: Unlike floating vinyl planks, glue-down flooring requires precision and experience. An uneven subfloor or improper adhesive can affect performance and appearance.
Subfloor Prep Is Critical: The surface must be clean, level, and dry. This adds time and potential cost, especially in older homes or commercial renovations.
More Time-Consuming to Install: Installation takes longer than click systems and includes curing time for the adhesive before the floor can be walked on.
Difficult to Remove or Replace: Repairs are possible, but pulling up glued flooring can be labor-intensive compared to floating systems.

Despite these drawbacks, glue-down vinyl remains a go-to choice when long-term durability and a flawless finish are top priorities.

How Much Does It Cost to Install Glue-Down Vinyl Flooring in Toronto?

Installation costs vary based on square footage, prep work, and whether it's a commercial or residential setting. Here's a general idea:

Material cost varies anywhere between $3.50 - $4.99
Installation cost varies anywhere between $2.50 - $3.50

*Keep in mind, subfloor preparation such as removal of old floors and adhesive are separate costs.

For an average 1000 sq. ft. project, you’re looking at a total of $6,000 to $9,000 depending on materials, subfloor condition, and layout.
We always offer free, no-obligation estimates for both residential and commercial clients across the Toronto area.

Final Thoughts: Is Glue-Down Vinyl Right for You?

If you’re looking for durability, stability, and professional-grade performance, glue-down vinyl plank or tile flooring is an excellent choice — especially in high-traffic commercial spaces or Toronto condos and basements where a low-profile and waterproof solution is essential.
At Parqueteam Hardwood Flooring, we’ve installed glue-down vinyl in offices, clinics, restaurants, retail stores, and private homes across Toronto and the GTA. Our expert team ensures proper subfloor preparation, clean application, and a finish that lasts.
Not sure if glue-down is right for your project? Reach out for a free quote — we’ll walk you through the best vinyl flooring options based on your space, needs, and budget.

Glue-down vinyl flooring installed in a high-traffic Toronto commercial office space

Frequently Asked Questions

1. How long does glue-down vinyl flooring last?
With proper installation and maintenance, glue-down vinyl can last 10 to 20 years or even longer, especially in commercial settings.

2. Is glue-down vinyl flooring waterproof?
Yes, most glue-down vinyl plank and tile products are 100% waterproof, making them ideal for kitchens, basements, and commercial spaces.

3. Can I install glue-down vinyl myself?
DIY installation is possible, but not recommended unless you're experienced. Glue-down vinyl requires precise subfloor prep and correct adhesive use, so professional installation is best.

4. Is glue-down vinyl more durable than click vinyl?
Generally yes. Because it’s firmly adhered to the subfloor, glue-down vinyl is less prone to shifting or movement, making it better for high-traffic areas and commercial applications.

5. Is glue-down vinyl suitable for condos?
Yes. Its low profile, stability, and quiet underfoot performance make it an excellent choice for Toronto condo units, especially where height clearance or soundproofing is a concern.

6. What’s the difference between glue-down and click vinyl flooring?
Click vinyl uses a floating floor system and clicks together over underlayment, while glue-down vinyl is adhered directly to the subfloor, offering a more permanent and stable installation.

7. How much does it cost to install glue-down vinyl flooring in Toronto?
On average, total costs range from $5.00 to $9.00 per square foot, including material, labour, subfloor prep, and any old floor removal. We offer free estimates across the GTA.

8. Can glue-down vinyl flooring be used in basements?
Yes — as long as the concrete subfloor is dry, level, and clean, glue-down vinyl is a great option for basement flooring.

0 Comments

Vinyl Plank Flooring Installation Cost in Toronto 2026

8/29/2025

0 Comments

Vinyl Plank Flooring Installation Cost in Toronto 2026

Updated June 2026

Vinyl plank flooring installation in Toronto usually costs between $6.50 and $8.50+ per square foot installed, depending on the vinyl product, installation method, subfloor condition, room layout, old flooring removal, and whether the project is for a condo, house, basement, rental property, or commercial space.
For many Toronto projects, vinyl plank flooring material costs around $2.69 to $4.99 per square foot, while straight installation usually costs around $1.50 to $3.50 per square foot. Herringbone or custom vinyl plank layouts cost more because they require extra layout planning, cutting, and labour.
At Parqueteam Hardwood Flooring, we install vinyl plank flooring in Toronto for condos, homes, basements, rental units, offices, retail spaces, and commercial properties.
Vinyl plank flooring is popular because it is waterproof, durable, modern-looking, and more affordable than hardwood. It is also one of the most practical flooring options for Toronto condos, basements, commercial spaces, and rental properties.

Click luxury vinyl plank flooring installed in a modern Toronto condo unit

Average Cost to Install Vinyl Plank Flooring in Toronto

For most Toronto-area properties, the cost to install vinyl plank flooring falls between $4.50 – $8 per square foot for basic material and installation. This range varies depending on the complexity of the space, quality of the materials, and whether you're opting for glue-down vinyl plank flooring or click-lock planks. Glue-down installations tend to cost slightly more for labour and material but provide better long-term performance—especially in high-traffic or commercial areas.

Here’s a quick cost breakdown:

Cost Breakdown: What You’re Paying For

Vinyl plank flooring costs aren’t just about the planks themselves. There are several components that make up your final installation quote—some obvious, others less so. Let’s break it all down.

Vinyl Plank Material Costs

The cost of the vinyl plank itself can vary significantly depending on the quality, thickness, wear layer, and type (click-lock vs glue-down).

Click Vinyl Flooring: $2.69 – $4.99 per sq. ft.
Glue Down Vinyl Flooring: $3.50 – $4.99 per sq. ft.

Factors that influence material pricing:

Wear Layer (measured in mils): 12–20 mil for residential, 20+ mil for commercial.
Thickness: Thicker vinyl plank floors tend to cost more, for example 8.5mm vinyl plank floor will cost more than 5mm vinyl plank floors
Visuals: Premium planks mimic hardwood and stone with greater realism.

Pro Tip: For commercial or rental properties, durability matters more than design. Choose 20+ mil wear layer for better longevity

Installation Labour Costs in Toronto

Labour typically accounts for $1.50 – $3.50 per square foot, depending on installation type and site conditions.

Click Vinyl Flooring Installation: $1.50 – $2.50 per sq. ft.
Glue Down Vinyl Flooring Installation: $2.50 – $3.50 per sq. ft.

Why glue-down costs more:

Requires precise adhesive application
Takes longer per room
Demands a level and clean subfloor
Typically used for commercial-grade installs

Subfloor Preparation & Additional Costs

Many homeowners forget about the hidden costs associated with preparing the subfloor. These extras can add anywhere from $1 to $8 per square foot, especially if your current flooring needs to be removed or the subfloor needs levelling.
Additional cost factors:

Removal of old flooring (laminate, tile, carpet): $0.50 – $2.00/sq. ft.
Subfloor leveling or patching: Starts at $250+
Underlayment (if required): $0.50 – $1.75/sq. ft.
Baseboard/quarter round replacement: $2.00 - $4.50/linear feet (materials included)

While these extras increase the upfront cost, they’re critical to ensuring your vinyl plank flooring performs well and lasts for years to come—especially in Toronto’s fluctuating climate.

Glue-down luxury vinyl plank flooring installed in Toronto Office

Example Project: How Much Does 1000 Sq. Ft. of Vinyl Plank Flooring Cost in Toronto?

To help you visualize what a real vinyl plank flooring installation might cost, let’s look at a sample project based on a 1000 square foot office, condo, house, or commercial unit in Toronto.
This example includes:

Mid-range glue-down luxury vinyl planks
Professional installation
removal of old flooring

Vinyl Plank Flooring Cost Breakdown For 1,000 Square Feet

For a 1,000 sq. ft. vinyl plank flooring project in Toronto, the total cost depends heavily on whether you choose click vinyl or glue-down vinyl, and whether removal or subfloor prep is needed.

A typical 1,000 sq. ft. project may include:
Vinyl plank material - $3,990 – $4,990
Straight installation - $2,500 – $3,500
Old flooring removal, if needed - $500 – $2,000
Subfloor preparation - Quoted based on condition
Total before extras and HST - Often around $6,500 – $10,500+
This range can increase if the project has uneven concrete, old adhesive, tile removal, damaged subfloor, many small rooms, angled cuts, furniture, baseboards, or commercial-grade requirements.
It can be lower if the space is open, the old flooring is already removed, the subfloor is clean and flat, and the layout is simple.

Things That Could Increase Cost:

Heavily damaged or uneven subfloors
Complex layouts with angled cuts or transitions
Adding underlayment, baseboards, or quarter rounds
Furnitures

Things That Could Lower Cost:

Large, open rooms (fewer cuts or transitions)
No old flooring to remove
Flat, clean subfloor that requires minimal prep
No Furnitures

This range helps you plan realistically. Most Toronto-area installations for 1,000 sq. ft. will land somewhere between $5,500 - $8,900 (before tax), depending on materials and conditions.

Factors That Affect Vinyl Plank Flooring Costs

Every flooring project is unique, and so is the final cost. Here's a breakdown of the main factors that influence how much you'll pay to install vinyl plank flooring in Toronto:

1. Installation Method: Click-Lock vs. Glue-Down

Click-Lock: Faster and easier to install, often cheaper for labour. However, may not be ideal for high-traffic commercial spaces or large open areas.
Glue-Down: More stable and long-lasting, especially for commercial flooring installs. Requires professional prep and adhesive work, which adds to labour cost.

Our recommendation: Glue-down is worth the extra investment for large spaces, offices, and any area with rolling chairs or carts.

2. Subfloor Condition

A clean, level subfloor keeps labour costs down.
If your subfloor is uneven, damaged, or covered in old adhesive or underlayment, prep costs can rise quickly.

3. Type & Quality of Vinyl Plank

Thicker planks are more durable and costly.
Designer finishes or embossed textures can also increase material pricing.

4. Room Size & Layout

Large open spaces are easier and faster to install, reducing labour costs per sq. ft.
Small rooms, narrow hallways, and angled layouts require more cutting and planning—adding time and cost.

5. Old Floor Removal

If you’re replacing old laminate, tile, or carpet, this adds to the cost.
Some older adhesives may require special removal or surface grinding before new flooring can be installed.

6. Residential vs. Commercial Application

Commercial installations often require higher-grade vinyl and adhesive, especially in high-traffic or public spaces.
Many commercial installs are glue-down, which increases labour and prep cost—but adds durability.

Vinyl Plank Flooring - Is It Worth It? Cost vs. Long-Term Value

Vinyl plank flooring isn’t just about affordability—it's also about smart long-term value. Here's why the upfront cost often pays off for Toronto homeowners and business owners alike:

Durability That Holds Up

Quality vinyl planks can last 10–20 years with proper installation and care.
Waterproof, scratch-resistant, and ideal for busy households, clinics, retail shops, and office settings.

Waterproof Performance

One of the biggest advantages over laminate or hardwood: vinyl plank flooring is 100% waterproof.
Perfect for:
- Toronto basements prone to moisture
- Entryways during slushy winters
- Kitchens and bathrooms

Low Maintenance

Easy to clean: regular sweeping and occasional mopping is all you need.
No waxing, sanding, or refinishing required—unlike hardwood floors.
Individual planks can be replaced if damaged (especially with glue-down installations).

Aesthetic Appeal Without the High Price

Vinyl plank mimics hardwood, tile, or stone at a fraction of the cost.
Available in wide planks, matte finishes, and realistic grain patterns.
Modern LVP flooring often fools even flooring professionals on first glance.

Return on Investment

Vinyl plank is one of the most cost-effective flooring upgrades in terms of value-per-dollar.
Improves the look and feel of a property while being budget-conscious.
Ideal for rental properties, investment units, or cost-aware commercial renovations.

In short: while it’s more affordable than hardwood, vinyl plank doesn’t feel like a “cheap” floor—and that’s why it continues to dominate the Toronto flooring market.

Final Thoughts on Vinyl Plank Flooring Cost in Toronto

Vinyl plank flooring cost in Toronto depends on the material, installation method, subfloor condition, old flooring removal, layout, and project type.
As a general guide, vinyl plank material usually costs around $2.69 to $4.99 per square foot, straight installation usually costs around $1.50 to $3.50 per square foot, and herringbone vinyl plank installation usually costs around $4.00 to $5.50 per square foot.
For condo floors in Toronto, commercial spaces, rentals, and basements, vinyl plank flooring can be one of the most practical and cost-effective flooring choices.
For an accurate quote, contact Parqueteam Hardwood Flooring and send photos of the space, approximate square footage, the type of property, and whether old flooring needs to be removed.

Waterproof vinyl plank flooring installed in a Toronto condo

Frequently Asked Questions (FAQ)

How much does vinyl plank flooring cost in Toronto?
Vinyl plank flooring in Toronto usually costs around $6.50 to $8.50+ per square foot installed, depending on the product, installation method, subfloor condition, old flooring removal, and project layout. Material often costs around $2.99 to $4.99 per square foot, while straight installation usually costs around $1.50 to $3.50 per square foot.
How much does vinyl plank flooring material cost?
Vinyl plank flooring material usually costs around $2.99 to $4.99 per square foot for many Toronto residential and commercial projects. The final material price depends on product quality, thickness, wear layer, colour, texture, waterproof core, brand, and whether it is click vinyl or glue-down vinyl plank.
How much does vinyl plank installation cost?
Straight vinyl plank installation in Toronto usually costs around $1.50 to $3.50 per square foot. Herringbone or custom vinyl plank installation usually costs more, often around $4.00 to $5.50 per square foot, because it requires more layout planning, cutting, and labour.
Is glue-down vinyl plank more expensive than click vinyl?
Glue-down vinyl plank can be more expensive to install than click vinyl because it requires adhesive, proper subfloor preparation, and more detailed installation. However, glue-down vinyl is often a better option for commercial spaces, rental properties, concrete subfloors, and high-traffic areas.
Is click vinyl plank cheaper to install?
Click vinyl plank is often cheaper and faster to install than glue-down vinyl because it is installed as a floating floor. However, the subfloor still needs to be flat and stable. Thin click vinyl can be risky, so 8mm click vinyl is usually a safer recommendation for long-term performance.
What thickness of vinyl plank flooring is best?
For click vinyl plank, 8mm is usually recommended because it tends to feel stronger and perform better than thinner products. A 7mm click vinyl plank may work in some situations, but anything under 8mm can be more risky depending on the product and subfloor. For glue-down vinyl plank, 3mm or 5mm can both be reliable when installed properly.
How much does glue-down vinyl plank cost to install?
Glue-down vinyl plank installation cost depends on the project, subfloor condition, adhesive, and layout. It is usually more labour-intensive than click vinyl because the floor must be properly prepared before installation. Glue-down vinyl is often used in commercial spaces, condos, rental units, and high-traffic areas.
How much does herringbone vinyl plank installation cost?
Herringbone vinyl plank installation in Toronto usually costs around $4.00 to $5.50 per square foot for labour. It costs more than straight lay installation because the pattern requires more measuring, layout planning, cutting, waste allowance, and detail work.
Is vinyl plank flooring good for condos?
Yes, vinyl plank flooring is a popular option for Toronto condos because it is waterproof, durable, and available in many modern styles. Condo projects may require elevator booking, building approval, soundproof underlayment, concrete subfloor preparation, and careful scheduling around condo rules.
Is vinyl plank flooring good for basements?
Yes, vinyl plank flooring is often a good option for basements because it is waterproof and more moisture-friendly than hardwood or laminate. The concrete subfloor should still be checked for flatness and moisture before installation. Depending on the space, click vinyl or glue-down vinyl may be recommended.
Is vinyl plank flooring good for commercial spaces?
Yes, vinyl plank flooring can be a strong choice for commercial spaces when the right product and installation method are used. Glue-down vinyl plank is often recommended for offices, clinics, retail spaces, rental units, and high-traffic areas because it offers better long-term stability than many floating floor options.
What extra costs should I expect with vinyl plank flooring?
Extra costs may include old flooring removal, disposal, subfloor leveling, concrete patching, adhesive, underlayment, transitions, reducers, baseboards, quarter round, door trimming, furniture moving, and appliance moving. Not every project needs these extras, but they can affect the final quote.
Is vinyl plank flooring worth it?
Vinyl plank flooring is often worth it for homeowners, condo owners, landlords, and commercial property owners who want a durable, waterproof, and affordable floor. It is not the same as real hardwood, but it offers strong value for condos, basements, rentals, commercial spaces, and high-traffic areas.
How do I get an accurate vinyl plank flooring quote?
The best way to get an accurate quote is to send photos of the space, approximate square footage, the type of property, and details about the existing floor. It also helps to mention whether you want click vinyl, glue-down vinyl, herringbone vinyl, old flooring removal, subfloor preparation, or commercial-grade vinyl plank.

0 Comments

Best Commercial Flooring Options for High-Traffic Areas in Toronto

8/13/2025

0 Comments

Why Flooring Matters in High-Traffic Commercial Spaces

Toronto is a fast-paced city where commercial spaces—from busy office lobbies to trendy restaurants—see heavy foot traffic every day. In these environments, choosing the right flooring isn’t just a design decision; it’s a business one. The right flooring option can impact how customers perceive your brand, how easy it is to maintain your space, and how long your investment lasts.
At Parqueteam Hardwood Flooring, we’ve worked with countless businesses across the Greater Toronto Area (GTA) to help them choose flooring that meets their functional needs while enhancing the look and feel of their space. Whether you’re outfitting a commercial office, a retail storefront, or a high-rise condo lobby, selecting durable, low-maintenance, and visually appealing flooring is crucial for long-term value.

Best Commercial Flooring Options for High-Traffic Areas in Toronto

Key Factors to Consider for High-Traffic Flooring

When choosing flooring for commercial spaces that see hundreds or even thousands of visitors a day, the decision goes beyond aesthetics. Here are the most important factors we recommend considering:

Durability: Foot traffic, moving furniture, and frequent cleaning take a toll. Materials must resist wear, scratches, dents, and moisture.
Ease of Maintenance: Low-maintenance flooring saves time and money in commercial operations. It should be easy to clean and maintain without special treatments.
Slip Resistance & Safety: In busy areas, safety is non-negotiable. Flooring must meet safety standards for traction and minimize the risk of slips, especially in entryways or food-service areas.
Aesthetic Appeal: First impressions matter. The flooring should complement your brand and interior design, creating a welcoming atmosphere.
Budget: From entry-level to high-end materials, your choice should balance up-front cost with long-term durability and performance.

By keeping these considerations in mind, you’ll be well-equipped to choose flooring that performs under pressure and enhances your commercial environment.

Top Flooring Options for Toronto Businesses

When it comes to flooring that can withstand Toronto’s busy commercial settings, a few standout options offer a blend of strength, appearance, and value. Below are the most popular and effective flooring types we recommend for high-traffic areas:

Glue-Down Vinyl Plank Flooring

Why it's great: Incredibly durable, water-resistant, and easy to clean, glue-down vinyl plank flooring is a favorite in commercial settings like retail, restaurants, and offices.
Best for: High-traffic lobbies, dental/medical clinics, salons, and retail stores.
Bonus: Available in wood- and stone-look designs to elevate aesthetics without the high cost.

Commercial-Grade Laminate Flooring (AC5–AC6 Rated)

Why it's great: With a tough wear layer and realistic visuals, commercial laminate offers excellent resistance to scratches, impacts, and fading.
Best for: Office spaces, retail shops, and showrooms.
Note: Opt for high AC ratings (AC5 or AC6) for commercial performance.

Engineered Hardwood Flooring

Why it's great: Engineered hardwood gives the rich, timeless look of real wood with added structural stability and moisture resistance.
Best for: Professional offices, boardrooms, upscale retail, and boutique spaces.
Caution: While beautiful, it’s better suited for medium-traffic areas and should be well-maintained.

Carpet Tiles (Glue-Down Only)

Why it's great: Easy to replace individual tiles, excellent sound insulation, and warm underfoot feel.
Best for: Commercial offices, hallways, and corporate boardrooms.
Pro tip: Choose low-pile, stain-resistant commercial-grade options.

Important Considerations Before Choosing Commercial Flooring in Toronto

Foot Traffic and Space Usage
Think about how many people will be walking through your space daily and what type of footwear or equipment will be used. For high-traffic zones like retail stores or busy office corridors, durability is critical. AC5/AC6 laminate or glue-down vinyl plank are excellent choices in this case. Engineered hardwood or carpet tiles may work better in boardrooms or executive suites where the wear is lighter.

Maintenance Needs and Cleaning Schedule
Some materials like vinyl plank and laminate are virtually maintenance-free and easy to clean. Others — like hardwood or carpet — may require periodic deep cleaning, refinishing, or stain treatment. If you want low upkeep, vinyl or laminate might be your best bet.

Moisture and Environmental Conditions
In environments where water, spills, or humidity are a concern (e.g., restaurants, entryways, or basements), waterproof options like glue-down vinyl flooring are ideal. Avoid solid hardwood in such locations unless conditions are fully controlled.

Aesthetic and Branding Goals
Commercial flooring contributes to your brand image. High-end hardwood exudes elegance and professionalism, while modern laminate or vinyl can help achieve a clean, contemporary look. Choose flooring that aligns with your visual identity and target customer impression.

Installation Time and Business Downtime
If time is a factor and you need your business up and running fast, floating floors (like click vinyl or laminate) offer quicker installation. Glue-down products or refinished hardwoods take longer but provide long-lasting results. Carpet tiles are also fast to install or replace with minimal interruption.

Carpet Tile Flooring in a high traffic office in toronto

Cost Breakdown: What to Expect When Budgeting for Commercial Flooring in Toronto

Understanding the pricing structure of commercial flooring can help you set realistic expectations and avoid surprises. Here’s a breakdown of the common costs associated with flooring installation projects in Toronto.

Material Costs

Vinyl Plank Flooring: $2.50 – $5.50 per sq. ft. (glue-down)
Laminate Flooring: $2.00 – $4.50 per sq. ft. (AC5/AC6 grade)
Engineered Hardwood: $5.00 – $10.00+ per sq. ft. (depending on thickness and brand)
Carpet Tiles: $2.50 – $5.50 per sq. ft.

Material selection heavily impacts cost. Vinyl and laminate tend to be more budget-friendly, while engineered hardwood is on the higher end of the spectrum.

Installation Costs

Glue-Down Vinyl: $2.50 – $3.50 per sq. ft.
Click Laminate or Vinyl: $2.00 – $3.00 per sq. ft.
Engineered Hardwood (Glue or Nail Down): $3.00 – $5.00 per sq. ft.
Carpet Tile Installation: $2.50 – $3.50 per sq. ft.

Complex layouts, old floor removal, subfloor leveling, and tight timelines can increase these base installation rates.
Always request a detailed quote that outlines what is included and what is considered an extra. At Parqueteam Hardwood Flooring, we always ensure full transparency.

Best Commercial Flooring Options Based on Toronto Business Types

Every business has unique functional and aesthetic requirements, and choosing the right flooring material can enhance both productivity and style. Here’s a breakdown of the most suitable commercial flooring options based on industry type in Toronto:

1. Office Spaces

Recommended Flooring: Glue-down vinyl plank, laminate flooring, or carpet tiles
Why: Offices demand a clean, professional look and quiet underfoot. Carpet tile floors help with acoustics and comfort, while vinyl and laminate offer easy maintenance and modern aesthetics.

2. Retail Stores and Showrooms

Recommended Flooring: Luxury vinyl plank or engineered hardwood
Why: High foot traffic requires durability and visual appeal. Glue-down vinyl resists wear and tear while offering beautiful wood-like finishes. Engineered hardwood adds a high-end feel for boutique environments.

3. Restaurants and Cafés

Recommended Flooring: Waterproof vinyl plank or high-grade laminate flooring (AC5 or AC6)
Why: Spills and heavy use are common. These flooring options are moisture-resistant, easy to clean, and visually warm — essential for creating a welcoming ambiance.

4. Medical and Healthcare Clinics

Recommended Flooring: Glue-down vinyl flooring or antimicrobial vinyl flooring
Why: These spaces demand hygienic, easy-to-sanitize surfaces. Vinyl is seamless, slip-resistant, and stands up to cleaning chemicals.

5. Fitness Studios and Gyms

Recommended Flooring: Durable vinyl plank or specialized commercial rubber (not offered by Parqueteam)
Why: Requires shock absorption, noise reduction, and resistance to impact. Vinyl plank is a budget-friendly alternative where rubber is not needed.

6. Condominium and Apartment Common Areas

Recommended Flooring: Engineered hardwood, laminate, or vinyl plank
Why: These areas need to balance elegance and functionality. Vinyl and laminate are popular for mailrooms and hallways, while engineered hardwood works well for lounges and lobbies.

Durable glue down vinyl flooring in toronto commercial space

Frequently Asked Questions

What is the most durable flooring for high-traffic commercial areas?
Glue down Vinyl plank is highly durable and designed to handle heavy foot traffic. Glue-down vinyl is especially popular in commercial settings for its resilience, ease of maintenance, and water resistance.

Can commercial flooring be installed during business hours?
Yes, but it depends on the business type. For offices or low-traffic settings, we can often work in stages. However, we recommend scheduling during off-hours or weekends to minimize disruption.

How long does it take to install commercial flooring?
A standard commercial flooring job (under 1,000 sq. ft.) can typically be completed in 1–2 days. Larger or more complex projects (involving glue-down, stairs, multiple rooms, or subfloor leveling) may take longer. We always provide time estimates during the quote stage.

Can you help with condo or multi-unit flooring projects?
Absolutely. We work with property managers, developers, and contractors for condo flooring projects. Whether it’s individual unit renovations or full common-area flooring, we can coordinate access and logistics with minimal disruption.

0 Comments

​Hardwood Flooring Experts in Toronto | Parqueteam Hardwood Flooring

Premium hardwood flooring services. We specialize in expert installation, refinishing, and repairs, proudly serving Toronto and the GTA​

Replacing Old Parquet or Carpet Flooring in a Toronto Condo

Why Many Toronto Condo Floors Need Replacement

Replacing Old Parquet Flooring in a Condo

Replacing Carpet Flooring in a Condo

Can You Install New Flooring Over Old Condo Flooring?

Best Flooring Options After Removing Old Parquet or Carpet

Engineered Hardwood Flooring

Laminate Flooring

Vinyl Plank Flooring

Best Replacement Choice by Situation

Final Thoughts on Replacing Old Condo Flooring

Replacing Old Condo Flooring FAQ

How Much Does It Cost to Glue Down Vinyl Flooring in Toronto?

What Is Glue-Down Vinyl Plank Flooring?

Cost Breakdown in Toronto

Cost Comparison vs Other Flooring Types

Factors That Affect Pricing

Is It Worth It? A Toronto Homeowner’s Perspective

Frequently Asked Questions (FAQs)

What Thickness of Vinyl Plank Flooring Is Best for Toronto Homes?

Understanding Vinyl Plank Flooring Thickness

Real-Life Recommendations from a Toronto Vinyl Plank Flooring Installer

Comparing Wear Layer Thickness: 6 mil vs 12 mil vs 20+ mil

Vinyl Plank Thickness & Installation Type: Floating vs Glue-Down

What Thickness Is Best for Toronto Homes, Condos, and Basements?

FAQs About Vinyl Plank Thickness in Toronto

Are Vinyl Plank Floors Better Than Laminate Floors?

What Are Vinyl Plank & Laminate Flooring?

Vinyl Plank Flooring (LVP/LVT)

Laminate Flooring

Vinyl Flooring vs. Laminate Flooring: Key Comparison Points for Toronto Homes

Which One Fits Best in Toronto Homes & Condos

Common Misconceptions & Trade-offs

Recommendations by Use-Case

FAQs – Vinyl Plank vs. Laminate Flooring in Toronto

Limited Lifespan Compared to Hardwood or Tile

Vinyl Flooring Repairs Are Not Easy

Can Be Susceptible to Subfloor Imperfections

Can Be Prone to Discoloration

Is Vinyl Plank Flooring Still Worth It in Toronto?

Frequently Asked Questions

What Is Click-Lock Vinyl Flooring?

What Is Glue-Down Vinyl Flooring?

Durability & Stability: Which One Wins?

Installation & Repair: Which One Is Easier?

Cost Comparison: Click vs. Glue-Down Vinyl Flooring in Toronto

Which One Should You Choose for Your Toronto Property?

Frequently Asked Questions (FAQ)

Choosing the Right Vinyl Installation Matters

What Is Glue-Down Vinyl Flooring?

Advantages of Glue-Down Vinyl Flooring in Toronto

When Is Glue-Down Vinyl the Best Choice?

Potential Drawbacks to Consider

How Much Does It Cost to Install Glue-Down Vinyl Flooring in Toronto?

Final Thoughts: Is Glue-Down Vinyl Right for You?

Frequently Asked Questions

Vinyl Plank Flooring Installation Cost in Toronto 2026

Average Cost to Install Vinyl Plank Flooring in Toronto

Cost Breakdown: What You’re Paying For

Vinyl Plank Material Costs

Installation Labour Costs in Toronto

Subfloor Preparation & Additional Costs

Example Project: How Much Does 1000 Sq. Ft. of Vinyl Plank Flooring Cost in Toronto?

Vinyl Plank Flooring Cost Breakdown For 1,000 Square Feet

Factors That Affect Vinyl Plank Flooring Costs

Vinyl Plank Flooring - Is It Worth It? Cost vs. Long-Term Value

Final Thoughts on Vinyl Plank Flooring Cost in Toronto

Frequently Asked Questions (FAQ)

Why Flooring Matters in High-Traffic Commercial Spaces

Key Factors to Consider for High-Traffic Flooring

Top Flooring Options for Toronto Businesses

Glue-Down Vinyl Plank Flooring

Commercial-Grade Laminate Flooring (AC5–AC6 Rated)

Engineered Hardwood Flooring

Carpet Tiles (Glue-Down Only)

Important Considerations Before Choosing Commercial Flooring in Toronto

Cost Breakdown: What to Expect When Budgeting for Commercial Flooring in Toronto

Best Commercial Flooring Options Based on Toronto Business Types

Hardwood Flooring Experts in Toronto | Parqueteam Hardwood Flooring

Premium hardwood flooring services. We specialize in expert installation, refinishing, and repairs, proudly serving Toronto and the GTA